The 2gig door sensor is likely one of the smallest wi-fi door sensors available on the market at this time. The mannequin quantity for the door sensor is 2GIG-DW10-345. The sensor truly used for something that opens reminiscent of a door or window. It may be used on storage doorways however it’s best when the sensor is used along with a magnetic door contact.

The sensor transmits a sign to the 2Gig management panel when the magnet is moved away from the sensor. This opens the circuit and can both provide you with a warning to the door being opened or set off an alarm relying on the mode that the management panel is ready for.

The sensor incorporates a tamper swap so if the sensor is opened the management panel will set off a bother on the panel or an alarm when the perimeter is armed.

Door Sensor Location

The 2gig door sensor may be positioned as much as 350 toes away from the management panel however is finest when positioned inside 100 toes if doable. The environmental situations can play an element within the efficient vary of the sensor. The swap a part of the sensor needs to be positioned on the stationary a part of the door or window however it can function in both place. The opening and shutting of the door could cause harm over time however this isn’t normally the case. The DW10 sensor shouldn’t be weatherproof however can be utilized outdoors in particular situations. The machine may be mounted in a weatherproof plastic box and nonetheless be detected so long as it’s inside vary of the management panel. There are gadgets that may be bought that can prolong the vary of the sensor. These gadgets will need to have energy with the intention to function so they won’t work in each state of affairs 센서모듈.

Set up of the Door/Window Sensor

The sensor may be mounted in any location alongside a door however the larger it’s mounted the higher. This prevents the sensor from being broken by vacuuming or being kicked or ran into. The machine has 2 mounting holes for screws however in my expertise you may mount the machine with the provided double stick tape after which apply a small bead of silicone across the outdoors. There are 2 batteries which might be provided with every sensor. The batteries are Panasonic CR2032 within the package deal however some other equal Lithium Batteries. Your batteries will sometimes final for a yr relying on how a lot use they get however it’s best to have a provide of batteries readily available in order that when a tool does have a low battery you’ll not compromise the safety of your house.

Programming the DW10 Door Sensor

The sensor is definitely programmed into the Go Management Panel. It’s essential to enter programming mode on the panel after which open the case of the sensor. Every sensor has a novel ID and the panel will detect the sign when the case is open and the machine is then set within the management panel. At the moment you will have choices so as to add customized descriptors for the machine.

Testing the DW10 Door Sensor

As soon as the machine is entered into programming it’s best to check earlier than doing the ultimate set up. The very first thing to do is to enter the check mode on the management panel. Subsequent you will want to go to the situation of the door or window and maintain the magnet subsequent to the sensor. While you transfer the sensor away from the magnet the management panel will sound. This can let you understand that the sign was detected. Go over to the management panel and take a look at the colour contact display. It’s going to point out the power of the sign and whether or not or not the sensor is in an efficient location.